Cara Setting Nanostation 2

Cara Setting Nanostation 2
 
  Masuk browser ketik ip default nanostation 2 (192.168.11.20)
 

Setelah masuk tulis: 

·         Username     = ubnt

·         Pass             = ubnt

·         Country       = compliance test

·         Language      = english

·         Centang 

  Setelah masuk menu settingannya pilih tab wireless , ganti :

·         Wireless mode          = access point

·         SSID                       = BEBAS

·         Channel                     = 7 – 2442Mhz (yang biasa digunakan)

·         Wireless security      = WPA

·         WPA preshared key   = BEBAS

·         Setelah itu klik changes (paling bawah kanan) dan pilih apply

  Lalu masuk tab network, ganti :

·         Network mode         = router

          Wlan network setting :

·         Ip address                    = 192.168.5.1

·         Netmask                       = 255.255.255.0

·         Centang enable nat dan dhcp server

·         Range start                   = 192.168.5.10 (bebas)

·         Range end                     = 192.168.5.20 (bebas)

·         Netmask                       = 255.255.255.0 (/24)

         Lan network setting:

·         Ip address                   = 192.168.11.22 (ip local dari router)

·         Netmask                      = 255.255.255.0

·         Gateway ip                   = 192.168.11.1

·         Primary dns dan secondary dns isi seperti biasa

·         Jika sudah klik change > apply

    Setting ip laptop:

·         Ip laptop      = 192.168.11.11

·         Netmask      = 255.255.255.0

·         Gateway      = 192.168.11.1 (gateway lan)

  Sekian posting kali ini semoga bermanfaat

Author : Irvan Yudha Andika

Share this

Related Posts